• Category Archives Sparkle N Sprinkle
  • Stamp Company » Sparkle N Sprinkle
  • SNS Fall Inspiration Hop

    Welcome to the Sparkle N Sprinkle Fall Inspiration Blog Hop!

    If you hopped here by way of Judy Rozema’s blog, then you’re on the right track. If you’ve arrived from somewhere else, you might want to start from
    the beginning, at the SNS blog, so as not to miss anyone’s remarkable cards! This is a 2 day hop,  10/18/10 thru 10/19/10. 

    Of course a prize is involved. Just:

    1. Leave a comment at each person’s blog (if experiencing technical problems, e-mail SNS_Artist@tampabay.rr.com with your name in the subject field, and include a message about the artist’s card and which blog it was at).
    2. Follow the directions at the last blog to become eligible for a stamp set of your choice!

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    (You may have seen these cards on the Splitcoast Faux Brad Tutorial which debuted 10/13/10.)  For both of my cards, I used the Autumn Swirl set 410. Isn’t it lovely? For the first card, I used a rainbow ink pad for the tree, greeting and 1/2″ faux brads. I used a Spellbinders rectangle to cut it out and a petite oval for the greeting. On the horizontal mustard layer, I stamped another of the swirl images using part of the Autumn Leaves Kpad. The sentiment was die cut using a petite oval nestie. The faux brads were made using a scrap of the vanilla which I first stamped w/ the swirl images using the Kpads. These faux brads are 1/2 inch. Finished card measures 5.5 x 4.25 (A2).

    Supplies:
    stamps: Sparkle N Sprinkle – Autumn Swril set 410
    paper: vanilla, mustard, grape
    ink: Kaleidacolor Creole Spice & Autumn Leaves
    accessories: Spellbinders petite ovals & rectangles, 1/2 inch hole punch (faux brads)

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    For this second card, I used the same images and layout, but “painted” my tree with 3 different embossing powders. The swirly tree image was stamped w/ VM and I used the 3 embossing powders and a technique I call “painting w/ ep”. I used a rectangle nestie to cut it out. Two very narrow mats, 1 mustard, 1 rust (spritzed w/ bleach), back it.

    On the horizontal mustard layer, I stamped another of the swirl images using part of the Autumn Leaves Kpad. The sentiment was die cut using a petite oval nestie. The Faux Brads were made using a scrap of the vanilla which I first stamped w/ the swirl images using VM and sprinkled w/ the embossing powders. These faux brads are 1/2 inch. Finished card measures 5.5 x 4.25 (A2).

    Supplies:
    stamps: Sparkle N Sprinkle – Autumn Swril set 410
    paper: vanilla, mustard, rust (spritzed w/ bleach)
    ink: VersaMark, Kaleidacolor Autumn Leaves
    accessories: embossing powders (Indian Corn, Fall Fiesta & Golden Follies- all SNS), Spellbinders petite ovals & rectangles, 1/2 inch hole punch (faux brads), bleach

    Thanks so much for stopping by! To continue the hop, please visit Sandy Meier who will be sharing her lovely Autumn inspired design.

     

     

    SaveSave


  • Another Twofer!

    And Dare to Get Dirty week continues! You can view a Master List of all the Challenges Here, but you’ll need to be a Fan Club Member.

     

     

    This first card was made for the following DTGD challenges: DTGD10JeanneS, DTGD10DeborahLynneS, DTGD10cindy_haffner, DTGD10flowergal36 and DTGD10justwritedesigns01. That’s a lot of challenges! I worked on this off an on over a couple of days and putting all the pieces together was really a challenge in itself.

    All images are Sparkle N Sprinkle. Actually there are only 2 stamped images; the lawn chair and the sentiment. Everything else was done with punches and scissors.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    The flower/sun and umbrella were both created using Quickutz scalloped flower dies and a chrysanthemum punch. The two bands of grass were cut with pinking shears then slits cut all along the tops. Greenery and flowers were also added. The sentiment was stamped on a leftover brayered piece and hand trimmed. A little butterfly was punched and a trail drawn with a black pen. Finished card measures 4.5 x 6.25 (A6).

    Supplies:
    stamps: Sparkle N Sprinkle
    paper: white, dp ((green, lime, orange & yellow w/ dots- all Paper Studio)
    ink: Ancient Page coal, Kaleidacolor Melon Melody
    accessories: Quickutz cookie cutter flower dies., Martha Stewart fence, branch & chrysanthemum punches, butterfly & clouds punches (All Night Media), sm flower punch (EK Success)

    This second card was done for the sketch challenge, SC290. Since Roxie based the sketch on this card I did last year, I couldn’t pass up making a card for the challenge. I was pretty excited when I saw the challenge.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    All images are Our Daily Bread designs. I started with what I thought was a quick and easy idea: split the image over the three panels. Even with the SAMJ (stamp a ma jig), it’s harder than it sounds. But I finally got it to work.

    The left and right squares were punched in opposite corners and each square was matted with black, then attached them to a larger ivory panel. I stamped the wheat image below them and added a larger black mat. The sentiment oval and black oval were cut with Spellbinders petite ovals. The finished ivory card measures 6.25 x 4.50 (A6).

    Supplies:
    stamps: ODBD
    paper: ivory, black
    ink: Ancient Page coal
    accessories: spellbinders petite ovals, Marvy corner punch, SAMJ

    Thanks so much for stopping by! Your comments are always read and much appreciated!


  • Dare to Get Dirty Week Continues!!

    Judging from Fan Club response so far, Dare to Get Dirty 2010 is a hit! And it’s a lot of fun. Not only do the FC Members get a chance to play in the dirt with the past and present Dirty Girls, they get to ask us questions or chat with us in the DTGD Forum. We still have more challenges – all the way thru Friday!

    Today, I’m hosting a DTGD challenge and also made a sample for my friend Cindy Haffner’s DTGD challenge! So I have a twofer today. (You can click any image to make it larger.)

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    This first card is for my challenge DTGD10justwritedesigns02.
    All images are DRS Designs.

    I just love these ladybugs! I stamped the ladybug stack twice, die cut one with a Mega Oval, sponged the background and drew a few grass sprigs. The second one, I colored the ladybugs with marker, cut them out and popped them up just a smidge on top of the base image. I used the same oval die to draw a slightly larger frame on black c/s and hand cut it.

    The greeting was also die cut w/ a long rectangle (it was resized) and sponged w/ lt blue ink while the die was still in place. I used an embossing folder on the green panel. After stamping  and coloring the ladybug border, I cut the bottom with a Quickutz scallop border and sponged as before. I cut another scallop border out of black and offset it.  The front of the 4.25 x 5.5 (A2) card was stamped w/ the ladybug background and colored as before. I made 3 black Faux Brads and attached them.

    Supplies:
    stamps: DRS Designs
    paper: white, black, green
    ink: Ancient Page coal, Memories soft baby blue & soft green
    accessories: Tombow markers, Spellbinders mega oval & long rectangle dies, Quickutz scallop border, Cuttlebug Welcome Baby combo (used the emboss folder only)

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    This second card is for Cindy Haffner’s challenge DTGD10cindy_haffner.
    All images and embossing powders are Sparkle N Sprinkle.

    For this one, I stamped and embossed the seashore circle first w/ white on the teal and again w/ teal on the white. I die cut the center only of the teal and the entire circle of the white one. The smaller teal is popped up slightly on top and I cut a bigger teal circle to back the two. The white panel has the upper corner punched with a deep edge punch and the center lower section punched w/ a small border punch. I used a Cuttlebug border to emboss the flourish across the center.

    The teal elements were die cut using the Spellbinders Symbology set. I left the die in place, sponged on white ink and embossed w/ the vanilla ice ep. I cut the ends off the two fan like elements and attached them under the embossed strip. An 1/8 inch hole punch was used on the parts I cut off and I glued the 3 tiny circles under the lower punched border. I used a small pencil eraser to dot the white ink on a teal scrap and embossed it then placed these circles under the upper punched corners. I made 2 vanilla ice embossed faux brads and attached them to the upper corners of the teal panel.

    Supplies:
    stamps: Sparkle N Sprinkle
    paper: white, teal
    ink: white & teal pigment inks
    accessories: Vanilla Ice & Poolside embossing powders, Spellbinders lg circles & Symbology dies, Cuttlebug organic flourish border, Martha Stewart daisy fan punch, small border punch, 1/8 & 1/4 inch hole punches

    Thanks so much for stopping by! I hope you’ll drop by Splitcoast and check out all the fabulous challenges. You’ll need to be a Fan Club Member to view them. So if you’re not a FC Member, why not join? It’s less than most magazine subscriptions and way more fun.

    SaveSave