• Party Dress

    ic170-party-dress-2144a
    I didn’t have a chance to do Saturday’s Inspiration challenge at SCS until today. But I really needed a birthday card for a little girl and I knew when I saw this Party Dress and remembered the template from Paper Craft Mag’s website, that this was the card I wanted to make.

    I printed out the pattern, then enlarged to 108% and cut one on white 12 x 4.5 c/s (folded in half lengthwise). I cut another front only out of the dp. Then I cut an apron out of vellum and ran it thru the CB w/ the Swiss dots folder. I used a white Permopaque marker around the edges.

    I cut a narrow band out of white and used the mini scallop scissors on top and bottom. I placed this behind the vellum then attached ribbon on top. That stupid little bow took me over half an hour to tie. I think I’ve mentioned before, I suffer from SRD (severe ribbon dysfunction).

    The bottom of the card also has a mini scallop border. I attached the apron/ribbon to the dp dress then attached this to the card. I made a little collar w/ the mini scallop scissors and pierced around the edge then attached it to my dress. Drops of liquid pearls were added as buttons.

    party-dress-close-up-2147ac
    Supplies:
    Stamps: none
    Paper: white, vellum, dp (Making Memories)
    Ink: none
    Accessories: cb swiss dots folder, ribbon, liquid pearls, mini scallop scissors, piercing tool, dress template from Paper Crafts Mag., white Permopaque marker
    juliesig


  • Out of the Box Nestie Tutorial

    This tutorial came about after an ongoing discussion with Roxie at SCS about our methods of doing the Out of the Box Nestie Technique. We each were using this technique, we just went about it differently.  (6/23/10 Edited to add: Roxie now has a blog and here is her version of this technique.)  I promised I would take some pictures to show my method.

    (Click on any image to enlarge.)

     

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    Step 1

     

    For Step 1, I stamped my image(s) and selected the Nestie shapes I might want to use. I selected the sizes of the circle and rectangle that were slightly smaller than my image in order to get the Out of the Box look I want. Usually, I just cut this frame out of white copy paper, but I’m using a light blue in order to be more visible here. The only reason I use a cut template and not the actual die is because of the 1/8″ difference in size. The inside of the die will be 1/8″ further into your image than the template. Most of the time this won’t matter, but on some of the more intricate ones I’ve done, it did make a difference.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    Step 2

     

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    Penciled Frame

    For Step 2, place the frame around the image and lightly trace the frame with a pencil.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    Step 3

    In Step 3, I use a craft knife to cut the areas which will be Out of the Box. In order to insert the Nestie die under this area, I have to start the cut inside the circle. I cut very close to the image outline and continue around the image to other side.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    Top Cut

    The Out of the Box area is cut. Note that the very top is just a rough cut for now. I don’t want it to be too unstable when I insert the Nestie die. I will go back and finish trimming this area with detail scissors after I’ve cut and embossed the Nestie circle.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    Step 4

    In Step 4, I insert the die under the Out of the Box area I’ve cut out. With the die under this area, it will not be cut or embossed. Test fit your die before cutting to make sure you have cut your image deep enough to allow the die to be inserted on your pencil lines.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    After cutting & embossing

    Now I will remove the die and finishing trimming the top area.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    After top is trimmed

    My Out of the Box is ready for coloring. It doesn’t really matter if you color your image before or after. I have done it both ways. With this method, it has worked the first time for me and I haven’t had to do it over. If my Out of the Box area has a lot of cutting inside the shape, I will usually add a little scotch tape to the back after it’s cut and embossed. This just stabilizes the area and really makes the cut disappear.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/
    Detail scissors

    I’m including this picture to show you my detail scissors. Quite a few people have commented on my detail cutting so I wanted to include this. The little orange pair of scissors have small, curved blades. You can see they are only about 4″ in length but the small curved tips make cutting a breeze. I’ve done a lot of decoupage and these scissors are invaluable. Fiskars made these, but cuticle scissors work, too. Another trick is to remember to turn the paper, not the scissors, when you are cutting.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    All done! This was colored with Prismacolor Pencils and OMS (odorless mineral spirits, aka Gamsol).

    Thanks for looking and I hope you try this fun technique. Here’s the finished card I made with this fun image.

     

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Julie2 sig

     


  • Diamond Latte

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Love the sketch, but the circles gave me a little trouble. I see now that maybe the circles weren’t supposed to overlap. Oh well.

    I stamped the latte cup (IO), made a template of the circle die and lightly penciled around the image. The top part of the image I cut around w/ a craft knife so I could slip the circle die underneath it so it wouldn’t get chopped off. Then I cut and embossed the nestie as usual. Roxie and I have had an ongoing discussion about our different methods of doing this nestie out of the box thing. I promised I would do a tutorial as a pic is worth a thousand words. So, I took pics as I did this one and hopefully, I’ll have tutorial to go w/ this tomorrow.

    Anyway, I stamped the rows of diamonds (SG) on the bottom band and more on the two pieces that became my overlapping circles. I colored everything w/ Prismacolor pencils and Gamsol (Odorless Mineral Spirits).

    On the m.mustard layers, I used an emery board to sand the edges. I placed one of these layers behind my latte cup then attached it, slightly lower, to the negative frame left when I cut it out (I placed a rect nestie around the circle when I cut it.)

    I used the scallop nesties to cut a red frame for my image and also the greeting.

    Supplies:
    Stamps: Impression Obsession, Studio G
    Paper: white, rose red, old olive, DCWV mat stack = to more mustard
    Ink: AP coal, primrose
    Accessories: gamsol, Prismacolor pencils, nestie circle, scallop rectangle and rectangle sets, foam tape