Tutorial with full pictures, learn how to mono print without using a gel plate.
- Tag Archives tutorial
-
-
Christmas Candle & Into the Window mini tutorial
A big Congrats to Roberta, the newest Featured Stamper (FS359)! She has such a wonderful gallery! I chose THIS beautiful card to case. I kept the large oval and shaving cream background, but I used different image, different colors and made mine a Christmas card.On my card today, I’m using this really wonderful candle image. I just love it! I thought it would look really nice w/ an opening behind it and the stained glass stamped on top. Logically, the stained glass should show thru the glass of the Hurricane lamp, but y’all will have to overlook that one. It was getting late and that was a bit too much to do. Especially since I already did a special “into the window” treatment. It’s a lot like “out of the box” but it goes into the cut out instead of out of it. After stamping the image, I lightly penciled in the shape of the oval opening I wanted to die cut. Then I cut around the parts that I needed to have on top of the die to keep from cutting them off and I inserted the oval die as shown.
It’s just a rough cut around the candle now…I’ll trim it after I die cut the oval.
This is how it looks with the bottom of the die inserted under the bottom of the image. All ready to die cut now.
Die cutting and embossing all finished! Now I’ll trim it and color the image. The stained glass image was gold embossed on a piece of dk purple shaving cream background I made ages ago. I liked the contrast of the dk purple behind the candle. The greeting was stamped below and my finished card is 4.25 x 5.50. These are the Copics I used to color it.
Congrats again, Roberta! Enjoy your week and Merry Christmas to all! Thanks so much for stopping by!
Supplies:Stamps: DRS Designs  –Holly Hurricane, Stained Glass Oval, Christmas Words Edger
Ink:  Memento tuxedo black, Tsukineko ultimate metallic gold pigment Paper: Neenah white, dk purple Accessories:  Copic markers, Spellbinders petite oval die, gold embossing powder, shaving cream & reinkers (for shaving cream background)
-
Pinwheel Tutorial
After seeing pinwheels of all shapes and sizes, then searching for dies to make pinwheels, it finally occurred to me that it might be pretty simple to make my own. Turns out it was VERY easy. And I made a quick little tutorial to show you how I did it.
(Click on any image to enlarge)
Supplies for this project are basic and just as simple as the pinwheel itself. I recommend paper about 24 lb weight or so. You can try card stock but it will be much stiffer and in smaller sizes, may be hard to work with. For my tutorial, I used 20lb copy paper, but when stamped, it made it a little see through. The 24 lb paper I used on my finished project did not show through. You can also try printed paper… either one sided or double sided for a different look. I used a cutting tool because I have trouble cutting straight, but you can use scissors or a craft knife if you choose.
Any size will do. I made these 4″ to make it easier to see here. I opted to stamp my squares using a Gingham Background from Our Daily Bread designs.
Important: Do not cut all the way to the center!  Cut in from the top toward the center, but stop about 1/4 ” before. Lift blade and cut in from the bottom, again stopping about 1/4″ from center.
This is what it should look like after the first cuts. Now turn your square so that the uncut corners are on the cutting line. Repeat the cuts, again stopping each cut about 1/4 ” from the center.
This is how your square should look after all 4 cuts. Place a small piece of double sided tape (you could also use tacky glue, but you’ll have to hold it a second or two) in the center.
Take one left corner and tack it to the center. You could also use the right corner, just make sure you use the SAME corner of each section (ie: all left corners or all right corners).
Continue until all same four corners are attached to the center. Your pinwheel is finished! Just add a brad or other embellishment in the center. Or stack a smaller pinwheel on top of a larger one like I did in my finished project.
You get a different look depending on which side you fold, face down or face up. These two started exactly the same but the left was folded w/ the printed side face up and the right was folded printed side face down. Try it w/ double sided paper, too!
A few other options to try: use a decorative edge die cut square, use decorative punches on the edges or decorative scissors before you fold. The one on the left was die cut w/ a Spellbinders Lacey Square and the one on the right was die cut w/ a Spellbinders scallop square die.And here is a finished project I made using a 1.25″ pinwheel stacked on top of a 1.50″ pinwheel w/ a brad in the center. (Just click on this LINKÂ and it will take you to the post w/ all the details about this card).
Thanks so much for stopping by! Have a great day and show me your pinwheels! I’d love to see what you do!