• Tag Archives Father’s Day

  • Boys Toys Birthday

    Posted on by Julie Comment

    A 2 for 1 card I made at the same time as last week’s motorcycle card. Made an extra motorcycle, so I made a birthday card w/ it, using pretty much all the same supplies.


    For the Inspiration Challenge (IC906), we are visiting Belk & their Pinterest Board. I was inspired by THIS item. I made several motorcycles last week & had one left over, so I made another slimline card w/ it.

    This card uses pretty much all the same supplies I used in THIS post, except the filmstrip die. While I was making all the motorcycles, I made an extra one. This time it was a little easier since I didn’t have to cut up all the motorcycles. I added a dry embossed copper background & backed it w/ a narrow black layer. 

    The motorcycle was popped up w/ foam to give it a little dimension, 

    Here is a handy trick that made putting the bike together a lot easier. I put a piece of sheet protector over the package w/ the bike picture & taped it to my glass mat. Then I assembled the pieces of the bike right on top of the picture.

    Since the pkg picture is the exact size, I knew the pieces would all be in the correct places. The sheet protector kept the glue off of the pkg & I was able to wipe it up easily off the sheet protector.

    Thanks so much for stopping by!


     


    Supplies:

    Stamps: Rubbernecker Stamps: Dad Phrases
    Paper:  Staples 110# white, glossy black, metallic copper, mirror silver, brushed silver
    Ink: Memento tuxedo black
    Accessories:  Rubbernecker Stamps:  Motorcycle,  Stitched Slimline dies,  Crossover II, Misti, Sizzix Diamond Plate embossing folder



    You might also like:

     

     


    This entry was posted in Birthday Embossing/Dry or Heat Masculine/Father's Day Rubbernecker Stamps Splitcoast Challenges and tagged

  • Boys Toys

    Posted on by Julie 1 Comment

    A masculine slimline card for a special man or boy, featuring a filmstrip die & a fab motorcycle. Helpful tip on assembling the die cuts, too.


    Happy Easter! A big congrats to Heather, the newest Featured Stamper (FS844)! She has a wonderful gallery full of scrapbook pages & after much browsing, I chose THIS page to case for my card. I kept the filmstrip layout but instead of pictures, I made clips of a motorcycle to fill my frames.

    So for my slimline card, I die cut the filmstrip then added a thick cardboard behind it to elevate it. I die cut all the parts of the motorcycle & put together 3 of them. I arranged them to look as if the camera was catching it as it rode by. I added the greeting in 2 parts to the last couple of frames. The copper layer was embossed w/ a diamond plate embossing folder.


    The bikes were all cut to fit inside the popped up filmstrip. I didn’t want to take the chance on messing it all up when I stamped the greeting, so I put it on separate pieces of white & fit them inside the filmstrip.


    Here is a handy trick that made putting these bikes together a lot easier. I put a piece of sheet protector over the package w/ the bike picture & taped it to my glass mat. Then I assembled the pieces of the bike right on top of the picture.

    Since the pkg picture is the exact size, I knew the pieces would all be in the correct places. The sheet protector kept the glue off of the pkg & I was able to wipe it up easily off the sheet protector.

    Thanks so much for stopping by!


    Supplies:

    Stamps: Rubbernecker Stamps: Dad Phrases
    Paper:  Staples 110# white, glossy black, metallic copper, mirror silver, brushed silver
    Ink: Memento tuxedo black
    Accessories:  Rubbernecker Stamps:  Motorcycle,  Stitched Slimline, Slimline Filmstrip dies,  Crossover II, Misti, Sizzix Diamond Plate embossing folder



    You might also like:


    This entry was posted in Birthday Masculine/Father's Day Rubbernecker Stamps Splitcoast Challenges and tagged

  • Tool Time Dad

    Posted on by Julie 1 Comment

    A big congrats to Aimeslee, the newest Featured Stamper (FS746) on Splitcoast. She has a lovely gallery & I chose THIS card to case. I kept the layout (for the most part) & the embossed bg, but I used different dies, colors & a different embossing folder. 

    For my Father’s Day card, I started by die cutting all the tool in red & mirror silver then putting them together. The jeans pocket & bg are some really old dp I had & it was a little too gray, so I sponged on some blue ink. For the pocket, I cut it first w/ a stitched square then took an angled border die across the bottom. I used a gold gel pen to create the “thread” stitching & added a piece of cardboard under the pocket & tucked the tools inside. The measuring tape is a piece of twill ribbon that I used a red Copic to color. The silver bg was embossed w/ a metal plate folder & I used a dk gray Copic to add some antiquing to it.

    Thanks so much for stopping by! 


     

    Supplies:

    Stamps: Rubbernecker Stamps: Toy Blocks & Letters Combo
    Paper:  Staples 110# white, Kraft, denim dp (unknown), mirror silver, red scraps
    Ink: Distress oxide brushed corduroy
    Accessories:  Rubbernecker Stamps: Rectangle Stitch,  Borders #1, Tools,  Stitched Square dies, Sizzix Diamond Plate/Riveted embossing folder set , Crossover II



    This entry was posted in Birthday Embossing/Dry or Heat Masculine/Father's Day Rubbernecker Stamps Splitcoast Challenges Sponging and tagged