• Category Archives Bugs/Butterflies/Dragonflies/Ladybugs/Bees
  • ISC August Release Day 2

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Background Series: Ledger/Nature Silhouette III

    Lately, have you noticed all the lovely Ledger design paper at your local stamp store? Well, now you can create a ton of lovely backgrounds on your cards and even in a mini book with this lovely Ledger image!

    The Creative Architects were challenged to incorporate some of the images from both of these lines on our card. Moreover, Nature Silhouette III bodes well with Nature Silhouette I/II.

    A little tip from Betsy: Use caution, but you can cut apart each of the images on the Hollyhock Shadow stamp and place them on your acrylic mount and arrange to your liking, then stamp away!

    For my card, I white embossed the Hollyhock Shadow onto a large shipping tag then sponged on three colors of distress inks.  I tore the side and bottom of the tag and used scissors and ink to further distress them. A portion of a punched fence was also sponged and added to the bottom. The white layer was embossed with a grid pattern embossing folder (Tim Holtz/Sizzix line). I distressed the edges all around.  I used a ticket corner punch and some sheer tissue ticket tape to create the small ticket in the upper right and tucked it into a tiny white envelope. You can see more of this tape across the center of the card.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    For the background, I white embossed the ledger then sponged on the distress inks as before. The little sentiment was also white embossed onto inked c/s and cut out.  The little butterfly was cut out and popped up with a little foam tape. Finished card measures 4.25 x 5.50 (A2).

    Thanks so much for stopping by! Please be sure to visit the entire Architect team. I know they’ll have wonders to behold!

    1. Kathy Tucker
    2. Joanne Grzelak
    3. Julie Warner (you are here!)
    4. Karen Dunbrook
    5. Judi Rose

    6. ISC Blog

     

    Julie2 sig

    I’m also including this in Today’s Moxie Fab challenge.

    Supplies:
    stamps: ISC – Nature Silhouette III, Ledger
    paper: white, lg shipping tag
    ink: Distress Inks  in broken china, worn lipstick, spiced marmalade,  shabby shutters & peeled paint, white pigment ink
    accessories: white embossing powder, Martha Stewart iron fence punch,  tiny envelope, sheer tissue ticket tape, grid embossing folder (Sizzix/Tim Holtz)


  • Another Twofer!

    And Dare to Get Dirty week continues! You can view a Master List of all the Challenges Here, but you’ll need to be a Fan Club Member.

     

     

    This first card was made for the following DTGD challenges: DTGD10JeanneS, DTGD10DeborahLynneS, DTGD10cindy_haffner, DTGD10flowergal36 and DTGD10justwritedesigns01. That’s a lot of challenges! I worked on this off an on over a couple of days and putting all the pieces together was really a challenge in itself.

    All images are Sparkle N Sprinkle. Actually there are only 2 stamped images; the lawn chair and the sentiment. Everything else was done with punches and scissors.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    The flower/sun and umbrella were both created using Quickutz scalloped flower dies and a chrysanthemum punch. The two bands of grass were cut with pinking shears then slits cut all along the tops. Greenery and flowers were also added. The sentiment was stamped on a leftover brayered piece and hand trimmed. A little butterfly was punched and a trail drawn with a black pen. Finished card measures 4.5 x 6.25 (A6).

    Supplies:
    stamps: Sparkle N Sprinkle
    paper: white, dp ((green, lime, orange & yellow w/ dots- all Paper Studio)
    ink: Ancient Page coal, Kaleidacolor Melon Melody
    accessories: Quickutz cookie cutter flower dies., Martha Stewart fence, branch & chrysanthemum punches, butterfly & clouds punches (All Night Media), sm flower punch (EK Success)

    This second card was done for the sketch challenge, SC290. Since Roxie based the sketch on this card I did last year, I couldn’t pass up making a card for the challenge. I was pretty excited when I saw the challenge.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    All images are Our Daily Bread designs. I started with what I thought was a quick and easy idea: split the image over the three panels. Even with the SAMJ (stamp a ma jig), it’s harder than it sounds. But I finally got it to work.

    The left and right squares were punched in opposite corners and each square was matted with black, then attached them to a larger ivory panel. I stamped the wheat image below them and added a larger black mat. The sentiment oval and black oval were cut with Spellbinders petite ovals. The finished ivory card measures 6.25 x 4.50 (A6).

    Supplies:
    stamps: ODBD
    paper: ivory, black
    ink: Ancient Page coal
    accessories: spellbinders petite ovals, Marvy corner punch, SAMJ

    Thanks so much for stopping by! Your comments are always read and much appreciated!


  • Dare to Get Dirty Week Continues!!

    Judging from Fan Club response so far, Dare to Get Dirty 2010 is a hit! And it’s a lot of fun. Not only do the FC Members get a chance to play in the dirt with the past and present Dirty Girls, they get to ask us questions or chat with us in the DTGD Forum. We still have more challenges – all the way thru Friday!

    Today, I’m hosting a DTGD challenge and also made a sample for my friend Cindy Haffner’s DTGD challenge! So I have a twofer today. (You can click any image to make it larger.)

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    This first card is for my challenge DTGD10justwritedesigns02.
    All images are DRS Designs.

    I just love these ladybugs! I stamped the ladybug stack twice, die cut one with a Mega Oval, sponged the background and drew a few grass sprigs. The second one, I colored the ladybugs with marker, cut them out and popped them up just a smidge on top of the base image. I used the same oval die to draw a slightly larger frame on black c/s and hand cut it.

    The greeting was also die cut w/ a long rectangle (it was resized) and sponged w/ lt blue ink while the die was still in place. I used an embossing folder on the green panel. After stamping  and coloring the ladybug border, I cut the bottom with a Quickutz scallop border and sponged as before. I cut another scallop border out of black and offset it.  The front of the 4.25 x 5.5 (A2) card was stamped w/ the ladybug background and colored as before. I made 3 black Faux Brads and attached them.

    Supplies:
    stamps: DRS Designs
    paper: white, black, green
    ink: Ancient Page coal, Memories soft baby blue & soft green
    accessories: Tombow markers, Spellbinders mega oval & long rectangle dies, Quickutz scallop border, Cuttlebug Welcome Baby combo (used the emboss folder only)

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    This second card is for Cindy Haffner’s challenge DTGD10cindy_haffner.
    All images and embossing powders are Sparkle N Sprinkle.

    For this one, I stamped and embossed the seashore circle first w/ white on the teal and again w/ teal on the white. I die cut the center only of the teal and the entire circle of the white one. The smaller teal is popped up slightly on top and I cut a bigger teal circle to back the two. The white panel has the upper corner punched with a deep edge punch and the center lower section punched w/ a small border punch. I used a Cuttlebug border to emboss the flourish across the center.

    The teal elements were die cut using the Spellbinders Symbology set. I left the die in place, sponged on white ink and embossed w/ the vanilla ice ep. I cut the ends off the two fan like elements and attached them under the embossed strip. An 1/8 inch hole punch was used on the parts I cut off and I glued the 3 tiny circles under the lower punched border. I used a small pencil eraser to dot the white ink on a teal scrap and embossed it then placed these circles under the upper punched corners. I made 2 vanilla ice embossed faux brads and attached them to the upper corners of the teal panel.

    Supplies:
    stamps: Sparkle N Sprinkle
    paper: white, teal
    ink: white & teal pigment inks
    accessories: Vanilla Ice & Poolside embossing powders, Spellbinders lg circles & Symbology dies, Cuttlebug organic flourish border, Martha Stewart daisy fan punch, small border punch, 1/8 & 1/4 inch hole punches

    Thanks so much for stopping by! I hope you’ll drop by Splitcoast and check out all the fabulous challenges. You’ll need to be a Fan Club Member to view them. So if you’re not a FC Member, why not join? It’s less than most magazine subscriptions and way more fun.

    SaveSave