Embossing/Dry or Heat – Page 23

Category Archives Embossing/Dry or Heat

Tall Dahlias

Posted on February 19, 2021 9:02 AM by Julie 1 Comment

Have you checked out all the terrific new Spring stamp sets & dies at Rubbernecker yet? They are fabulous! If you want to see the entire release it’s HERE. And don’t forget to join in on our Instagram Hop. There are PRIZES involved! Just click the IG Hop badge below. This is also for the Splitcoast Inspiration Challenge (IC794) & THIS was my inspiration.

For my card, after stamping & coloring, I die cut the dahlias, using my out of the box technique on the left side. The matching dies will let you cut out the flower heads separately, but since I already had them arranged, I did this way so I could have them still part of the white panel. For the black dotty panel, I wanted some black & white paper but didn’t have any that was just right. So…I took a piece of black & embossed it w/ folder that has 2 sizes of dots. Then I took out my Japanese screw punch & used 2 sizes of bits to drill out the embossed dots. Having the pattern already embossed, made it really easy & quick. Here’s a pic showing the process.

The greeting was white embossed on a small black strip.

Here are the Copics I used for these beautiful dahlias.

Thanks so much for stopping by!

Supplies:

Stamps: Rubbernecker Stamps –Darling Dahlias

Paper: Staples 110# white, black,

Ink: Memento tuxedo black, Colorbox frost white pigment

Accessories: Rubbernecker Darling Dahlias, Slimline Nested Stitch dies, MISTI, Screw Punch Tool & bits, Darice Dots Bg embossing folder, Copic Sketch Markers, white embossing powder

RN Darling Dahlias 3408	RN Darling Dahlias dies 3408D	RN Slimline Nested Stitch dies 5326D	Ranger Embossing Powder	Colorbox Pigment Ink
Staples 110# White Card Stock	Darice Dots Bg folder 1215-59	Screw Punch Tool & bits	AC color card stock	Copic Sketch Markers

Birthday Candles

Posted on February 6, 2021 10:39 PM by Julie 1 Comment

A big congrats to Jen, the newest Featured Stamper (FS731) at Splitcoast! She has a wonderful gallery & I chose THIS card to case. I liked the 3 little tags w/ images on them, so I kept that. But I used different images, dies & colors, & turned the layout to vertical.

Don’t forget to check out the Rubbernecker Stamps Birthday Giveaway! (Click the pic below to take you there!)

For my card, I came across this leftover bg piece that I had made ages ago. I love how bright & festive it is & thought it would be perfect w/ these 3 candles. The bg was done by inking the inside of the birthday embossing folder w/ a rainbow ink pad, then embossing it. I colored the candles to go w/ this bg, die cut them then added them to the 3 die cut tags. I wanted a little more separation between them & the bg so I die cut a wide-ish frame to go around the bg. It also helps to disguise the fact that this bg doesn’t run the entire length of the card front.

There were a few areas that the color on the bg had run into the white letters but a little touch up w/ a white Posca pen helped disguise it.

Here’s the inside. Just a little trimmed off piece at the bottom & I used the same rainbow ink to stamp the greeting.

Thanks so much for stopping by!

Supplies:

Stamps: Rubbernecker Stamps: Candle set (Many Happies on inside)

Paper: Staples 110# white, X-Press It

Ink: Memento tuxedo black, Kaleidacolor Spectrum

Accessories: Rubbernecker Stamps: Candle die, Rectangle Stitch, Rounded Corner Rectangle Stitch, Tag Stitch dies, Crossover II, Copic Sketch Markers, white Posca Paint Pen, Happy Birthday embossing folder (Cuttlebug), Sequins

RN Candle set 60-0200405	RN Candle die 60-020405	RN Many Happies 124SO	RN Rectangle Stitch dies 5007D	RN Rounded Corner Rectangle Stitch dies 5017D
RN Tag Stitch dies 5149D	Memento Inks	Copic Sketch Markers	Staples 110# White Card Stock	X-Press It Blending Card
Posca Paint Pen	Kaliedacolor ink pads	RN Crossover II	Cuttlebug Happy Birthday 37-1133	Sequins

This entry was posted in Birthday CAS Cuttlebug/Quickutz/Sizzix Embossing/Dry or Heat Rubbernecker Stamps Splitcoast Challenges and tagged Birthday candles Copic Embossing/Dry or Heat Rubbernecker tags

Watercolor Diamonds

Posted on February 5, 2021 11:50 PM by Julie 2 Comments

It’s my honor to host the Splitcoast Inspiration Challenge (IC792) & we’re headed to a UK site called Zabana Jewellery & their Pinterest Board. I was inspired by THIS as my inspiration.

For my card, I die cut a piece of 90# watercolor paper, put it into my Misti & stamped the diamond bg w/ white pigment ink & heat embossed it w/ white powder. When it cooled, I used a lg oval wash brush to wet the bg & a smaller round brush to float in the various colors. After I stamped the greeting, I die cut it w/ a rectangle die then used an angled border die to cut the top & bottom. Here are a few pics I took to show this on the green layer where I matched the cuts.

Thanks so much for stopping by!

Supplies:

Stamps: Rubbernecker Stamps: Distress Harlequin Bg, Best Friend set

Paper: Staples 110# white, green, Strathmore Water Color Paper

Ink: Memento tuxedo black, Colorbox frost white pigment

Accessories: Rubbernecker Stamps: Rectangle Stitch, Borders 2 dies, Brushos Water Color Crystals, white embossing powder

RN Best Friend set 3334	RN Distress Harlequin Bg 1123-01	RN Rectangle Stitch dies 5007D	RN Borders 2 dies 5160-02D	Memento Inks
Strathmore Water Color Paper 90#	AC color card stock	Staples 110# White Card Stock	MISTI	Colorbox Pigment Ink
Ranger Embossing Powder	Brushos Water Color Crystals

This entry was posted in CAS Embossing/Dry or Heat Rubbernecker Stamps Splitcoast Challenges Watercolor and tagged CAS Embossing/Dry or Heat friend Rubbernecker Splitcoast water color