• Category Archives Fall/Halloween/Thanksgiving
  • SNS Fall Inspiration Hop

    Welcome to the Sparkle N Sprinkle Fall Inspiration Blog Hop!

    If you hopped here by way of Judy Rozema’s blog, then you’re on the right track. If you’ve arrived from somewhere else, you might want to start from
    the beginning, at the SNS blog, so as not to miss anyone’s remarkable cards! This is a 2 day hop,  10/18/10 thru 10/19/10. 

    Of course a prize is involved. Just:

    1. Leave a comment at each person’s blog (if experiencing technical problems, e-mail SNS_Artist@tampabay.rr.com with your name in the subject field, and include a message about the artist’s card and which blog it was at).
    2. Follow the directions at the last blog to become eligible for a stamp set of your choice!

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    (You may have seen these cards on the Splitcoast Faux Brad Tutorial which debuted 10/13/10.)  For both of my cards, I used the Autumn Swirl set 410. Isn’t it lovely? For the first card, I used a rainbow ink pad for the tree, greeting and 1/2″ faux brads. I used a Spellbinders rectangle to cut it out and a petite oval for the greeting. On the horizontal mustard layer, I stamped another of the swirl images using part of the Autumn Leaves Kpad. The sentiment was die cut using a petite oval nestie. The faux brads were made using a scrap of the vanilla which I first stamped w/ the swirl images using the Kpads. These faux brads are 1/2 inch. Finished card measures 5.5 x 4.25 (A2).

    Supplies:
    stamps: Sparkle N Sprinkle – Autumn Swril set 410
    paper: vanilla, mustard, grape
    ink: Kaleidacolor Creole Spice & Autumn Leaves
    accessories: Spellbinders petite ovals & rectangles, 1/2 inch hole punch (faux brads)

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    For this second card, I used the same images and layout, but “painted” my tree with 3 different embossing powders. The swirly tree image was stamped w/ VM and I used the 3 embossing powders and a technique I call “painting w/ ep”. I used a rectangle nestie to cut it out. Two very narrow mats, 1 mustard, 1 rust (spritzed w/ bleach), back it.

    On the horizontal mustard layer, I stamped another of the swirl images using part of the Autumn Leaves Kpad. The sentiment was die cut using a petite oval nestie. The Faux Brads were made using a scrap of the vanilla which I first stamped w/ the swirl images using VM and sprinkled w/ the embossing powders. These faux brads are 1/2 inch. Finished card measures 5.5 x 4.25 (A2).

    Supplies:
    stamps: Sparkle N Sprinkle – Autumn Swril set 410
    paper: vanilla, mustard, rust (spritzed w/ bleach)
    ink: VersaMark, Kaleidacolor Autumn Leaves
    accessories: embossing powders (Indian Corn, Fall Fiesta & Golden Follies- all SNS), Spellbinders petite ovals & rectangles, 1/2 inch hole punch (faux brads), bleach

    Thanks so much for stopping by! To continue the hop, please visit Sandy Meier who will be sharing her lovely Autumn inspired design.

     

     

    SaveSave


  • ODBD Oct Release Blog Hop!

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Welcome to Our Daily Bread designs’ October Release Blog Hop!

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/Weekly-Favorite
    BEST OF 2010

    For my card, I used the new Randi’s Song set. I love the leaf block and beautiful script. I had some left over background from long ago projects and the colors just said Fall to me. I stamped the leaf block image 6 times onto an alcohol ink background (polished stone technique) and cut out three of the leaves to pop them up on the base image.  On the marigold layer, I stamped the script multiple times with the gold ink. I also stamped the shadow leaf with gold ink and the leaf veins using a Kpad. It’s attached to another background I call Gilded Rainbow (here’s the tutorial for this technique). The dk redwood brown layer was cut with deckle scissors and all layers were edged with a gold leafing pen. I wrapped some gold thread around the brown layer then attached it to a 8.5 x 4 (fits a #9 business envelope) card. The card was also marigold in color, but since I couldn’t find just the right color of rich paprika, I sponged it with color until I liked it.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Thanks so much for stopping by!

     

    Supplies:
    stamps: ODBD – Randi’s Song
    paper: marigold, redwood brown, alcohol ink background & gilded rainbow background
    ink: Kaleidacolor Autumn Leaves, Brilliance Galaxy Gold, Ancient Page coal
    accessories: deckle edge scissors, Krylon gold leafing pen, gold thread


  • Gilded Rainbow Tutorial

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Click on any picture to enlarge.

    Supplies Needed:

     

    Step One:

    Brayer the entire piece of paper using the rainbow ink pad.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Step Two:

    Crumple the piece of brayered paper into a ball.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Step Three:

    Flatten out the paper and ink the creases using the direct to paper (DTP) technique. I’m using Tea Dye Distress ink.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Step Four:

    Crumple the paper once again, flatten out and ink the creases with a darker ink. I’m using Ancient Page Sienna ink. Repeat steps 3 & 4 with a different ink color. I’m using the Distress Fired Brick ink.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Step Five: (Optional)

    I wanted to tone the color down a little, so I used the Soft Wheat ink all over the paper.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Step Six:

    Crumple the paper a final time, smooth out and ink the creases with the metallic gold pigment ink. I‘m using the Encore Ultimate Metallic Gold ink.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Step Seven:

    Sprinkle on the embossing powder. Do not cover the entire paper. I used a little measuring spoon to drop the powder here and there. Tap off the excess and return to the jar. Heat the powder until melted and until any non coated areas are dry.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Step Eight:

    Enjoy your finished background! Here’s a card example using a piece of this finished background. I used it for a backing layer for some color behind the leaves on the marigold panel.

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/

    Julie Warner - justwritedesigns https://thewritestuff.justwritedesigns.com/